How To Replace Fireplace Surround Tile

Replacing fireplace surround tile can be a great way to update the look of your fireplace and add some personality to your home. It's a project that can be completed in a weekend with a little bit of planning and preparation. Here are the essential steps on how to replace fireplace surround tile:

1. Remove the old tile. Before you can install new tile, you'll need to remove the old tile. This can be done with a hammer and chisel, or with a power tool such as a rotary hammer or a tile saw. If you're using a hammer and chisel, be careful not to damage the fireplace surround.

2. Prepare the surface. Once the old tile is removed, you'll need to prepare the surface for the new tile. This may involve repairing any cracks or holes in the fireplace surround, or leveling the surface with a self-leveling compound.

3. Install the new tile. Once the surface is prepared, you can begin installing the new tile. Start by laying out the tile on the fireplace surround to make sure that it fits properly. Once you're satisfied with the layout, apply a thin layer of mortar to the back of each tile and press it into place.

4. Grout the tile. Once the tile is installed, you'll need to grout the joints between the tiles. To do this, mix the grout according to the manufacturer's instructions and apply it to the joints with a grout float. Once the grout is applied, allow it to dry for the recommended amount of time.

5. Seal the tile. Once the grout is dry, you'll need to seal the tile to protect it from moisture and stains. To do this, apply a sealer to the tile according to the manufacturer's instructions.

Replacing fireplace surround tile is a relatively easy project that can be completed in a weekend with a little bit of planning and preparation. By following these steps, you can give your fireplace a new look and add some personality to your home.