How To Refinish Fireplace Doors

How to Refinish Fireplace Doors

Fireplace doors are an essential part of any fireplace, and they can make a big difference in the overall look and feel of your home. If your fireplace doors are looking a little worse for wear, don't despair! Refinishing them is a relatively easy project that can be completed in a few hours.

Materials You'll Need

Sandpaper (120-grit, 220-grit)
Tack cloth
Primer
Paint or stain
Clear coat
Paintbrush or foam roller

Step-by-Step Instructions

1. Remove the fireplace doors

Before you can begin refinishing your fireplace doors, you'll need to remove them from the fireplace. This is usually a simple matter of removing a few screws or bolts. Once the doors are removed, you can take them outside or to a well-ventilated area to work on them.

2. Sand the doors

Start by sanding the doors with 120-grit sandpaper. This will remove any old paint or finish and create a smooth surface for the new finish to adhere to. Once you've sanded the doors with 120-grit sandpaper, switch to 220-grit sandpaper and sand again. This will help to smooth out the surface even more.

3. Wipe down the doors with a tack cloth

Once you've sanded the doors, it's important to wipe them down with a tack cloth to remove any dust or debris. This will help to ensure that the new finish adheres properly.

4. Apply primer

Next, apply a coat of primer to the doors. This will help to create a smooth, even surface for the paint or stain to adhere to. Allow the primer to dry completely before proceeding.

5. Paint or stain the doors

Once the primer is dry, you can paint or stain the doors. If you're painting the doors, use a brush or foam roller to apply two coats of paint, allowing each coat to dry completely before applying the next. If you're staining the doors, apply a thin, even coat of stain and allow it to dry completely.

6. Apply clear coat

Once the paint or stain is dry, apply a clear coat to protect the finish. This will help to keep the finish looking its best for years to come.

7. Reinstall the doors

Once the clear coat is dry, you can reinstall the doors on the fireplace. Simply replace the screws or bolts that you removed earlier, and you're done!

Tips

If you're not sure what type of paint or stain to use, consult with a professional at your local hardware store.
Be sure to allow each coat of paint or stain to dry completely before applying the next.
If you're staining the doors, be sure to apply a thin, even coat and avoid over-applying the stain.
A clear coat will help to protect the finish of your fireplace doors, but it's important to reapply it every few years to keep it looking its best.