How To Reface A Fireplace Insert

How to Reface a Fireplace Insert

Refacing a fireplace insert is a great way to update the look of your fireplace without having to replace the entire unit. It's a relatively easy project that can be completed in a few hours. Here's a step-by-step guide on how to reface a fireplace insert:

Materials You'll Need:

New fireplace insert face
Screwdriver
Drill
Measuring tape
Level
Caulk gun
Caulk

Step 1: Remove the Old Faceplate

Start by removing the old faceplate from the fireplace insert. Most faceplates are held in place by screws. Simply unscrew the screws and lift the faceplate off of the insert.

Step 2: Measure and Cut the New Faceplate

Measure the opening of the fireplace insert and cut the new faceplate to size. If the new faceplate is too large, you can trim it down using a hacksaw or utility knife. If the new faceplate is too small, you can add a border around the edge using trim molding.

Step 3: Install the New Faceplate

Once the new faceplate is cut to size, place it over the opening of the fireplace insert. Align the faceplate with the insert and screw it into place. Be sure to use a level to make sure that the faceplate is level.

Step 4: Caulk Around the Edges

Once the faceplate is installed, caulk around the edges to seal any gaps. This will help to prevent drafts and keep the faceplate in place.

Step 5: Enjoy Your New Fireplace Insert!

Congratulations! You have now successfully refaced your fireplace insert. Enjoy the updated look of your fireplace and the warmth and comfort that it provides.

Tips for Refacing a Fireplace Insert:

Be sure to measure the opening of the fireplace insert before you purchase the new faceplate.
If you are not comfortable cutting the new faceplate to size, you can have it cut at a home improvement store.
Use a level to make sure that the faceplate is level before you screw it into place.
Caulk around the edges of the faceplate to seal any gaps and prevent drafts.
Enjoy your new fireplace insert!