How To Redo A Fireplace With Stacked Stone

If you want to give your fireplace a rustic and updated look, using stacked stone is a great option. Stacked stone is a versatile material that can be used to create a variety of different looks, from traditional to contemporary. Here are the steps on how to redo a fireplace with stacked stone:

1. Gather your materials

You will need the following materials to redo your fireplace with stacked stone:

Stacked stone

Thinset mortar

Grout

Grout float

Sponge

Caulk gun

Caulk

2. Prepare the fireplace

Before you begin installing the stacked stone, you need to prepare the fireplace. This involves removing the old mantel and any other trim, and cleaning the surface of the fireplace. You should also check the fireplace for any damage, such as cracks or holes, and repair them before you begin installing the stacked stone.

3. Install the stacked stone

To install the stacked stone, you will need to mix the thinset mortar according to the manufacturer's instructions. Then, you will need to apply a thin layer of mortar to the back of each stone and press it into place on the fireplace. You should work from the bottom up, and make sure to stagger the joints between the stones. Once you have installed all of the stacked stone, you will need to let the mortar dry for at least 24 hours.

4. Grout the stacked stone

Once the mortar has dried, you will need to grout the stacked stone. To do this, you will need to mix the grout according to the manufacturer's instructions. Then, you will need to apply the grout to the joints between the stones using a grout float. You should work in small sections, and make sure to press the grout into the joints firmly. Once you have grouted all of the joints, you will need to let the grout dry for at least 24 hours.

5. Caulk the stacked stone

Once the grout has dried, you will need to caulk the stacked stone. This will help to seal the joints and prevent water from seeping in. To do this, you will need to apply a bead of caulk to the joints between the stones using a caulk gun. You should work in small sections, and make sure to press the caulk into the joints firmly. Once you have caulked all of the joints, you will need to let the caulk dry for at least 24 hours.