How To Install Gas Fireplace Remote Control

Installing a gas fireplace remote control can be a great way to make your fireplace more convenient and comfortable to use. With a remote control, you can turn the fireplace on and off, adjust the flame height, and even change the temperature from the comfort of your chair. If you're thinking about installing a gas fireplace remote control, here are a few things you'll need to do: ### 1. Choose the right remote control There are a variety of gas fireplace remote controls on the market, so it's important to choose one that's compatible with your fireplace. You'll also want to consider the features that are important to you, such as the range, the number of buttons, and the display. ### 2. Gather your tools Once you've chosen a remote control, you'll need to gather the following tools: * Screwdriver * Drill * Wire strippers * Electrical tape * Level ### 3. Prepare the fireplace Before you can install the remote control, you'll need to prepare the fireplace. This includes turning off the gas supply and disconnecting the electrical power. ### 4. Install the receiver The receiver is the part of the remote control that communicates with the fireplace. It's typically installed behind the fireplace's faceplate. To install the receiver, follow these steps: 1. Remove the faceplate from the fireplace. 2. Locate the receiver wire harness. 3. Connect the receiver wire harness to the fireplace's wire harness. 4. Secure the receiver to the back of the fireplace using the provided screws. 5. Reinstall the faceplate. ### 5. Install the remote control The remote control is the part that you use to operate the fireplace. It's typically installed on a wall near the fireplace. To install the remote control, follow these steps: 1. Decide where you want to install the remote control. 2. Mark the location of the mounting holes on the wall. 3. Drill pilot holes for the mounting screws. 4. Secure the remote control to the wall using the provided screws. ### 6. Test the remote control Once the remote control is installed, it's important to test it to make sure that it's working properly. To do this, turn on the gas supply and electrical power to the fireplace. Then, press the power button on the remote control. The fireplace should turn on. If the fireplace doesn't turn on, check the following: * Make sure that the gas supply is turned on. * Make sure that the electrical power is connected. * Make sure that the receiver is properly connected to the fireplace. * Make sure that the remote control is properly installed. If you've checked all of these things and the fireplace still doesn't turn on, you may need to call a qualified technician.