Build Your Own Fireplace Blower Grate

Fireplace blower grates are a great way to improve the efficiency of your fireplace and circulate warm air throughout your home. They are relatively easy to build, and the materials are readily available at most hardware stores.

To build your own fireplace blower grate, you will need the following materials:

A piece of 1/4-inch thick steel plate, cut to the size of your fireplace opening
A 12-inch long piece of 1/2-inch diameter steel pipe
A 12-inch long piece of 1/2-inch diameter copper pipe
A 12-inch long piece of 1/4-inch diameter steel rod
A 12-inch long piece of 1/4-inch diameter copper rod
A 12-inch long piece of 1/8-inch diameter steel wire
A 12-inch long piece of 1/8-inch diameter copper wire
A 12-inch long piece of 1/16-inch diameter steel wire
A 12-inch long piece of 1/16-inch diameter copper wire
A 12-inch long piece of 1/32-inch diameter steel wire
A 12-inch long piece of 1/32-inch diameter copper wire
A 12-inch long piece of 1/64-inch diameter steel wire
A 12-inch long piece of 1/64-inch diameter copper wire
A 12-inch long piece of 1/128-inch diameter steel wire
A 12-inch long piece of 1/128-inch diameter copper wire
A 12-inch long piece of 1/256-inch diameter steel wire
A 12-inch long piece of 1/256-inch diameter copper wire
A 12-inch long piece of 1/512-inch diameter steel wire
A 12-inch long piece of 1/512-inch diameter copper wire
A 12-inch long piece of 1/1024-inch diameter steel wire
A 12-inch long piece of 1/1024-inch diameter copper wire

Once you have gathered all of your materials, you can begin assembling your blower grate. Start by drilling a 1/2-inch hole in the center of the steel plate. This hole will be used to mount the blower motor.

Next, weld the steel pipe to the center of the steel plate. The pipe should be positioned so that it is perpendicular to the plate and the hole you drilled earlier.

Now, weld the copper pipe to the steel pipe. The copper pipe should be positioned so that it is perpendicular to the steel pipe and the hole you drilled earlier.

Next, bend the steel rod into a U-shape. The U-shape should be about 6 inches wide and 3 inches tall.

Now, weld the steel rod to the steel plate. The steel rod should be positioned so that the U-shape is facing the fireplace opening.

Next, bend the copper rod into a U-shape. The U-shape should be about 6 inches wide and 3 inches tall.

Now, weld the copper rod to the copper pipe. The copper rod should be positioned so that the U-shape is facing the fireplace opening.

Next, thread the steel wire through the hole in the steel plate. The wire should be threaded through the hole so that it is perpendicular to the plate and the hole you drilled earlier.

Now, thread the copper wire through the hole in the copper pipe. The wire should be threaded through the hole so that it is perpendicular to the pipe and the hole you drilled earlier.

Next, tie the steel wire to the steel rod. The wire should be tied so that the steel rod is held in place against the steel plate.

Now, tie the copper wire to the copper rod. The wire should be tied so that the copper rod is held in place against the copper pipe.

Next, connect the steel wire to the steel plate. The wire should be connected so that the steel plate is held in place against the fireplace opening.

Now, connect the copper wire to the copper pipe. The wire should be connected so that the copper pipe is held in place against the fireplace opening.

Finally, connect the blower motor to the steel pipe. The blower motor should be connected so that the air is blown out of the fireplace opening.

Your fireplace blower grate is now complete. Enjoy the warmth and comfort of a roaring fire without the worry of smoke and soot.