Blot Fireplace Blower Kit Installation Instructions

Installing a fireplace blower kit can significantly enhance the efficiency of your fireplace and distribute heat more evenly throughout your home. The procedure may seem daunting, but following these comprehensive installation instructions will make the process a breeze.

Step 1: Safety Precautions

Before proceeding, ensure the fireplace is cool and has not been used for at least several hours. Turn off the power at the electrical panel and disconnect the electrical cord from the fireplace.

Step 2: Gather Tools and Materials

You will need:

Blot fireplace blower kit
Screwdriver
Drill
1/8-inch drill bit
Level

Step 3: Preparing the Fireplace

Inspect the fireplace floor and remove any debris or obstructions. Position the blower frame inside the fireplace, ensuring it is centered and level. Use the level to verify that the base is even from side to side and front to back.

Step 4: Mounting the Blower Frame

Secure the blower frame to the fireplace floor using the provided screws. Follow the manufacturer's instructions carefully and ensure the screws are tightly fastened.

Step 5: Installing the Blower Unit

Place the blower unit on top of the blower frame, aligning the mounting holes. Lift the blower unit slightly and drill 1/8-inch pilot holes through the mounting holes into the frame. Insert the provided screws and tighten them securely.

Step 6: Connecting the Electrical

Connect the blower unit's electrical cord to the fireplace's electrical cord. Ensure the connections are secure and that the wires are not exposed or pinched.

Step 7: Final Touches

Turn on the power at the electrical panel and reconnect the fireplace's electrical cord. Test the blower by adjusting the speed and temperature settings to ensure proper operation.

Additional Tips

If you encounter any difficulties or obstacles during the installation, consult a professional.
Regularly inspect the blower kit and clean or replace the filter as needed.
Consider adding a remote control switch for convenient operation from anywhere in the room.

By following these instructions diligently, you can successfully install a fireplace blower kit and enjoy the benefits of a more efficient and cozy fireplace.