How To Build A Stone Fireplace Surround

Building a stone fireplace surround is a great way to add character and warmth to your home. It can be a challenging project, but it is definitely achievable with the right materials and instructions. Here is a step-by-step guide on how to build a stone fireplace surround:

Materials you'll need:

Stone veneer
Mortar
Grout
Caulking
Level
Measuring tape
Hammer
Chisel
Trowel

Step 1: Prepare the fireplace

The first step is to prepare the fireplace for the stone surround. This means removing any existing trim or moldings, and cleaning the surface of the fireplace. You will also need to create a level surface for the stone veneer to be installed on.

Step 2: Apply the mortar

Once the fireplace is prepared, you can start applying the mortar. Use a trowel to spread a thin layer of mortar over the surface of the fireplace. Be sure to level the mortar as you go.

Step 3: Install the stone veneer

Now it's time to install the stone veneer. Start by placing the first stone in the center of the fireplace. Use a level to make sure the stone is level, and then press it into the mortar. Continue installing the stones, working your way from the center outward.

Step 4: Grout the joints

Once the stone veneer is installed, you can grout the joints. Mix the grout according to the manufacturer's instructions, and then use a trowel to spread it over the joints. Be sure to remove any excess grout with a damp sponge.

Step 5: Caulk the seams

The final step is to caulk the seams between the stone veneer and the fireplace. This will help to seal the joints and prevent water from seeping in. Use a caulk gun to apply a bead of caulk around the edges of the stone veneer.

Congratulations! You have now successfully built a stone fireplace surround. Enjoy the warmth and beauty of your new fireplace for years to come.