How To Remove Fireplace Insert

Removing a fireplace insert can be a daunting task, but it is definitely possible to do it yourself with the right tools and a little bit of know-how. Here are the steps on how to remove a fireplace insert:

Gather your tools.

To remove your fireplace insert, you will need the following tools:

Phillips screwdriver
Flathead screwdriver
Wrench
Gloves
Safety glasses

Disconnect the power.

Before you begin, make sure to disconnect the power to the fireplace insert. This can be done by turning off the breaker or by unplugging the insert from the outlet.

Remove the faceplate.

The first step in removing the fireplace insert is to remove the faceplate. This is usually held in place by screws or clips. Once the faceplate is removed, you will have access to the inside of the insert.

Disconnect the wires.

Once the faceplate is removed, you will need to disconnect the wires that are connected to the insert. Be careful not to damage the wires, as this could cause a fire hazard.

Unbolt the insert.

Once the wires are disconnected, you need to unbolt the insert from the fireplace. This is usually done with a wrench. Be careful not to drop the insert, as it could be heavy.

Remove the insert.

Once the insert is unbolted, you can remove it from the fireplace. Be careful not to damage the fireplace or the insert.

Inspect the fireplace.

Once the insert is removed, you will be able to inspect the fireplace. Look for any cracks or damage that may need to be repaired. You should also clean the fireplace thoroughly before installing a new insert.

Install the new insert.

Once the fireplace is inspected and cleaned, you can install the new insert. This process is usually the reverse of the removal process. Be sure to follow the manufacturer's instructions for installation.