How To Paint Brass Fireplace Insert Black

How to Paint a Brass Fireplace Insert Black

A brass fireplace insert can add a touch of elegance to any room, but over time, the brass can start to look dated or tarnished. If you're looking to update the look of your fireplace insert without replacing it, painting it black is a great option. Here's a step-by-step guide on how to do it:

Materials you'll need:

* Degreaser * Sandpaper (120-grit and 220-grit) * Tack cloth * High-heat spray paint in black * Painter's tape (optional)

Instructions:

1. Clean the brass insert: Use a degreaser to remove any dirt, grease, or fingerprints from the brass insert. Allow the degreaser to dry completely. 2. Sand the brass insert: Use 120-grit sandpaper to lightly sand the surface of the brass insert. This will help to create a rough surface for the paint to adhere to. Once you've sanded the entire surface, wipe it down with a tack cloth to remove any dust. 3. Mask off any areas you don't want to paint (optional): If there are any areas of the brass insert that you don't want to paint, such as the trim or handles, use painter's tape to mask them off. 4. Apply the first coat of paint: Hold the spray paint can about 8 inches away from the brass insert and apply a light, even coat of paint. Allow the first coat to dry completely before applying a second coat. 5. Apply a second coat of paint: Once the first coat is dry, apply a second coat of paint. This will help to ensure that the paint is evenly distributed and that there are no thin spots. 6. Allow the paint to dry completely: Once you've applied the second coat of paint, allow it to dry completely before using the fireplace insert. This will help to prevent the paint from peeling or chipping. Tips: * Use a high-heat spray paint that is specifically designed for use on metal surfaces. * Apply the paint in thin, even coats to avoid runs or drips. * Allow each coat of paint to dry completely before applying the next coat. * If you're not sure how the paint will look on the brass insert, test it out on a small, inconspicuous area first. * Once the paint is dry, you can touch it up with a clear high-heat enamel spray paint to protect it from scratches and heat.