Can You Put Stacked Stone Over Brick Fireplace

Can You Put Stacked Stone Over Brick Fireplace?

Stacked stone and brick are both popular materials for fireplace surrounds. Stacked stone is often used to create a more rustic look, while brick is more traditional. But is it possible to put stacked stone over brick fireplace? The answer is yes, but it's important to follow a few steps to ensure a successful installation.

Preparation

Before you begin, it's important to prepare the brick fireplace surface. This involves cleaning the surface to remove any dirt or debris. You should also check for any loose or damaged bricks and repair them as needed. Once the surface is clean and dry, you can begin applying a thin layer of mortar to the brick.

Installation

Once the mortar is applied, you can begin installing the stacked stone. Start by placing the first stone in the bottom corner of the fireplace surround. Use a level to ensure that the stone is level and plumb. Continue adding stones, working your way up the fireplace surround. As you add each stone, be sure to apply mortar to the back of the stone and to the side of the stone that will be touching the next stone. This will help to create a strong bond between the stones.

Grouting

Once the stacked stone is installed, you can grout the joints between the stones. Grout is a mixture of cement, sand, and water that is used to fill in the gaps between tiles. To grout the joints, simply apply the grout to the joints using a grout float. Be sure to work the grout into the joints completely and to remove any excess grout from the surface of the stone. Allow the grout to dry completely before you use the fireplace.

Finishing

Once the grout is dry, you can finish the stacked stone fireplace surround by applying a sealer. Sealer is a clear liquid that is applied to the stone to protect it from stains and moisture. To apply sealer, simply brush or spray the sealer onto the stone. Allow the sealer to dry completely before you use the fireplace.

Tips

Here are a few tips for installing stacked stone over brick fireplace:

Use a thin layer of mortar when installing the stacked stone. Too much mortar can make the stone difficult to level and can also cause the stone to crack.
Be sure to apply mortar to the back of each stone and to the side of the stone that will be touching the next stone. This will help to create a strong bond between the stones.
Use a level to ensure that each stone is level and plumb. This will help to create a neat and professional-looking finish.
Grout the joints between the stones as soon as possible after installing the stone. This will help to prevent dirt and debris from getting into the joints.
Apply sealer to the stacked stone fireplace surround once the grout is dry. This will help to protect the stone from stains and moisture.