How To Install Wood Burning Fireplace Blower

How to Install a Wood Burning Fireplace Blower

A wood-burning fireplace blower can help circulate warm air throughout your home, making it a more efficient and cost-effective way to heat your space. If you're considering installing a fireplace blower, here's a step-by-step guide to help you get the job done.

Step 1: Gather Your Materials

You will need the following materials to install a fireplace blower:

Fireplace blower
Screwdriver
Drill
Drill bit
Wire nuts
Electrical tape
Safety glasses
Dust mask

Step 2: Prepare the Fireplace

Before you begin installing the blower, you need to prepare the fireplace. This involves removing any ashes or debris from the firebox and sweeping the area clean. You should also make sure that the damper is open and that there are no obstructions in the flue.

Step 3: Mount the Blower

The next step is to mount the blower to the fireplace. Most blowers come with a mounting bracket that you can use to attach it to the side of the firebox. Use the screws provided to secure the bracket to the firebox.

Step 4: Connect the Electrical Wiring

Once the blower is mounted, you need to connect the electrical wiring. Most blowers come with a pre-wired cord that you can simply plug into an outlet. However, if your blower does not have a pre-wired cord, you will need to wire it yourself. To do this, follow these steps:

Turn off the power to the fireplace circuit at the breaker panel.
Connect the black wire from the blower to the black wire in the fireplace.
Connect the white wire from the blower to the white wire in the fireplace.
Connect the ground wire from the blower to the ground wire in the fireplace.
Secure all of the connections with wire nuts and electrical tape.
Turn the power back on at the breaker panel.

Step 5: Test the Blower

Once the blower is installed and wired, you should test it to make sure that it is working properly. To do this, simply turn on the blower and feel for warm air coming out of the vents. If the blower is not working, check the electrical connections and make sure that the power is turned on.