How To Turn Off Pilot Light On Regency Gas Fireplace

How to Turn Off the Pilot Light on a Regency Gas Fireplace

If you need to turn off the pilot light on your Regency gas fireplace, follow these steps:

Locate the pilot light assembly. It is usually located at the bottom of the firebox, behind the grate.
Turn off the gas supply to the fireplace. This is usually done by turning a valve on the gas line that supplies the fireplace.
Wait a few minutes for the gas to dissipate. This will help to prevent a gas explosion.
Use a long lighter or match to light the pilot light. Hold the lighter or match near the pilot light assembly and turn on the gas supply. The pilot light should ignite.
Hold the pilot light button down for 30 seconds. This will allow the thermocouple to heat up and keep the pilot light lit.
Release the pilot light button. The pilot light should stay lit.
Turn on the fireplace. The fireplace should now be lit.

If you have any questions about turning off the pilot light on your Regency gas fireplace, please consult your owner's manual or contact a qualified technician.

Additional Tips

If the pilot light does not stay lit, check to make sure that the thermocouple is properly seated in the pilot light assembly.
If the pilot light is still not staying lit, you may need to replace the thermocouple.
Do not attempt to turn off the pilot light while the fireplace is lit.