How To Build A Stone Surround For Electric Fireplace

How to Build a Stone Surround for Electric Fireplace

Building a stone surround for an electric fireplace is a great way to add a touch of rustic elegance to your home. It's also a relatively easy project that can be completed in a weekend. Here are the steps on how to do it:

Materials

Electric fireplace
Stone veneer
Mortar
Grout
Corner pieces (optional)

Tools

Trowel
Grout float
Level
Tape measure
Pencil

Instructions

1. Prepare the wall. Start by cleaning the wall where you will be installing the stone surround. Remove any dirt, dust, or debris. If the wall is uneven, you may need to level it using drywall or plaster.

2. Measure and cut the stone. Measure the length and width of the area where you will be installing the stone surround. Cut the stone veneer to fit the measurements.

3. Apply mortar to the wall. Spread a thin layer of mortar on the wall using a trowel. Be sure to cover the entire area where the stone will be installed.

4. Install the stone. Place the stone pieces on the mortar, starting at the bottom and working your way up. Press each piece firmly into the mortar and level it using a level.

5. Install the corner pieces (optional). If you are using corner pieces, install them now. Apply mortar to the corners of the wall and press the corner pieces into place.

6. Grout the stone. Once the stone is installed, mix the grout according to the manufacturer's instructions. Apply the grout to the joints between the stone pieces using a grout float.

7. Clean the stone. Remove any excess grout from the stone using a damp sponge. Wipe down the stone with a clean cloth to remove any dust or debris.

8. Enjoy your new stone surround! Once the grout has dried, you can enjoy your new stone surround for years to come.