How To Install Stacked Stone Panels On Fireplace

Stacking stone panels on your fireplace is a great way to add a unique and stylish touch to your home. It is a relatively easy project that can be completed in a weekend with the right tools and materials.

Materials You'll Need:

Stacked stone panels
Thin-set mortar
Notched trowel
Grout
Grout float
Sponge
Caulk gun
Caulk

Step-by-Step Instructions:

1. Prepare the Fireplace:
Clean the fireplace surface thoroughly and remove any loose debris. If the fireplace is made of drywall, you will need to install a cement backer board over the drywall before continuing.

2. Apply Thin-Set Mortar:
Using a notched trowel, apply a thin layer of thin-set mortar to the back of the stone panel. Be sure to spread the mortar evenly and avoid getting any on the front of the panel.

3. Install the Stone Panel:
Carefully press the stone panel onto the fireplace surface and press firmly to ensure good adhesion. Use a level to make sure the panel is straight and level.

4. Repeat Steps 2-3:
Continue applying thin-set mortar and installing stone panels until the entire fireplace is covered. Make sure to stagger the joints between the panels for a more natural look.

5. Grout the Joints:
Once the thin-set mortar has dried, you can grout the joints between the stone panels. Use a grout float to apply the grout and smooth it into the joints. Be sure to wipe away any excess grout with a sponge.

6. Caulk the Edges:
To finish off the installation, apply a bead of caulk around the edges of the stone panels. This will help to seal the joints and prevent moisture from getting behind the panels.

Tips:

Use a wet saw to cut the stone panels to size.
Wear gloves and safety glasses when working with thin-set mortar and grout.
Allow the thin-set mortar and grout to dry completely before using the fireplace.
Clean the stone panels regularly with a damp cloth.