How To Lay Stacked Stone Fireplace

How to Lay a Stacked Stone Fireplace

A stacked stone fireplace is a beautiful and timeless addition to any home. It can add warmth and character to any room, and it can also increase the value of your home. If you're thinking about adding a stacked stone fireplace to your home, here's a step-by-step guide on how to do it yourself.

Materials You'll Need

Stacked stone veneer
Mortar
Fireplace insert
Grout
Sealant
Tools
Masonry saw
Trowel
Grout float
Caulking gun

Step 1: Prepare the Firebox

The first step is to prepare the firebox. This involves removing any existing fireplace insert or grate. You'll also need to clean the firebox and make sure that it is level.

Step 2: Lay the Base Course

The next step is to lay the base course of stone. This course will form the foundation of your fireplace, so it's important to make sure that it is level and secure. Start by spreading a thin layer of mortar on the bottom of the firebox. Then, carefully place the first stone in place. Use a level to make sure that the stone is level, and then tap it into place with a rubber mallet.

Step 3: Continue Laying the Stone

Once the base course is in place, you can continue laying the stone. Start by spreading a thin layer of mortar on top of the base course. Then, carefully place the next stone in place. Use a level to make sure that the stone is level, and then tap it into place with a rubber mallet. Continue laying the stone in this manner until you reach the desired height.

Step 4: Install the Fireplace Insert

Once the stone is in place, you can install the fireplace insert. Follow the manufacturer's instructions for installing the insert. Once the insert is installed, you can begin grouting the stone.

Step 5: Grout the Stone

Grouting the stone will help to fill in any gaps between the stones and give the fireplace a finished look. To grout the stone, mix a small batch of grout according to the manufacturer's instructions. Then, using a grout float, apply the grout to the joints between the stones. Be sure to work the grout into the joints completely.

Step 6: Seal the Stone

Once the grout has dried, you can seal the stone. Sealing the stone will help to protect it from moisture and stains. To seal the stone, apply a thin layer of sealant to the entire surface of the stone. Be sure to follow the manufacturer's instructions for applying the sealant.

Step 7: Enjoy Your New Fireplace

Once the sealant has dried, your new stacked stone fireplace is complete. Now you can sit back, relax, and enjoy the warmth and beauty of your new fireplace.